Single Ceiling Mount

The CoolSpot is preferred for it''s extremely white, pure light output, an integral dimming wheel which allows the user to select the right intensity for any procedure and a beam that always stays cool with the CoolSpot double head filtration system.

Features:

• 4,800 footcandles
• Variable spot size of 2"-10" (5-25cm) diameter
• Color temperature of 3500 degrees K
• Low voltage 150 wat halogen bulb with 500 hour life
• Integral dimming wheel
• Double head filtration system
• Drift free arm
• Low voltage operation minimizes electrical hazards

Approvals:

• Listed by U.L. (Underwriters Laboratories), CSA Certified

Materials:

• Light Housing: Die cast aluminum 
• Yoke and arm/pivot adapters: Aluminum 
• Yoke cover/arm tube: Steel

Electrical Characteristics:

• Input Voltage: 115 Volts AC, 60 Hz, single phase (may be wired for 230volts AC, 50/60 Hz) 
• Input Current: 1.5 amperes (115 volts) or 0.75 amperes (230 volts)
• Bulb Type: DDL tungsten halogen with integral dichroic reflector, 21.0 volts, 150 watts 
• Bulb Life:  500 hours average
• Power Cord: Ceiling mounts are hard wired to the house wiring. Floorstand base and wall mount have SJT 18AWG wire 6-foot long power cord with a hospital grade plug.
• Power Switch: Rated 12 A at 250 vac, double pole single throw for on/off 
• Lamp Socket: Dual pin; ceramic 
• Current Leakage: Less than 100 micro amperes

Optical Characteristics:

Dimensions and Adjustability: Lighthead has 2" legs; 8" from head axis to end of each leg, 4" lighthead thickness, 26" (66 cm) from lighthead pivot to arm attachment axis. Lighthead supplied standard with sterilizable handle. Lighthead pivots 170 degrees on its yoke. The yoke pivots 340 degrees on the flexible arm. The flexible arm pivots 40 degrees above and below horizontal, for a total angular travel of 80 degrees.

Single Ceiling Mount: 12" (30.5 cm) diameter mounting plate and cover attaches to reinforced ceiling with three fasteners 3/88" (9.5 mm) diameter located on an 8" (203 mm) diameter hole circle, elecrical input wires routed through a 2" (50.8 mm) cutout. Contains one ceiling mount pole which allows installation in rooms with ceilings up to 9.5'' height (2.89 m) based on installing the arm at 80" (203 cm) above the floor. Contains one fixed horizontal extension arm which is 17" (431.8 mm) from pivot to pivot. The extension arm pivots 320 degrees on the ceiling mounting pole. Maximum reach is 43" (1.09 m) from the ceiling pole axis to the lighthead pivot.